SYNC=DISABLE, DEBUGRUN=HALT, CLKSEL=PRESCEM01GRPACLK, DISSYNCOUT=EN, QDM=X2, PRESC=DIV1, MODE=UP, RETIMEEN=DISABLE
No Description
| MODE | Timer Mode 0 (UP): Up-count mode 1 (DOWN): Down-count mode 2 (UPDOWN): Up/down-count mode 3 (QDEC): Quadrature decoder mode |
| SYNC | Timer Start/Stop/Reload Synchronization 0 (DISABLE): Timer operation is unaffected by other timers. 1 (ENABLE): Timer may be started, stopped and re-loaded from other timer instances. |
| OSMEN | One-shot Mode Enable |
| QDM | Quadrature Decoder Mode Selection 0 (X2): X2 mode selected 1 (X4): X4 mode selected |
| DEBUGRUN | Debug Mode Run Enable 0 (HALT): Timer is halted in debug mode 1 (RUN): Timer is running in debug mode |
| DMACLRACT | DMA Request Clear on Active |
| CLKSEL | Clock Source Select 0 (PRESCEM01GRPACLK): Prescaled EM01GRPACLK 1 (CC1): Compare/Capture Channel 1 Input 2 (TIMEROUF): Timer is clocked by underflow(down-count) or overflow(up-count) in the lower numbered neighbor Timer |
| RETIMEEN | PWM output retimed enable 0 (DISABLE): PWM outputs are not re-timed. 1 (ENABLE): PWM outputs are re-timed. |
| DISSYNCOUT | Disable Timer Start/Stop/Reload output 0 (EN): Timer can start/stop/reload other timers with SYNC bit set 1 (DIS): Timer cannot start/stop/reload other timers with SYNC bit set |
| RETIMESEL | PWM output retime select |
| ATI | Always Track Inputs |
| RSSCOIST | Reload-Start Sets COIST |
| PRESC | Prescaler Setting 0 (DIV1): No prescaling 1 (DIV2): Prescale by 2 3 (DIV4): Prescale by 4 7 (DIV8): Prescale by 8 15 (DIV16): Prescale by 16 31 (DIV32): Prescale by 32 63 (DIV64): Prescale by 64 127 (DIV128): Prescale by 128 255 (DIV256): Prescale by 256 511 (DIV512): Prescale by 512 1023 (DIV1024): Prescale by 1024 |